This command enables us to edit the properties of previously defined pipes. To do so, when executing the command, it will ask us for the section to be edited, which, once selected, will open the following editing window.
Name: The name of the section.
Network: The network to which the pipe belongs. The option of changing it.
Material: The type of material assigned to the pipes.
Diameter: The diameter of the pipe in millimeters.
Grade Line Elevation: Point of application point of the grade line in the pipe:
· Key: The top of the pipe.
· Alignment: The middle of the pipe.
·Sheet of Water: The bottom of the pipe.
Trench: We also have the option of drawing the trench if it hasn´t been drawn. By unchecking this box, the edited pipes will be redrawn without the polyline in relation to the trench.
· Width: The width of the trench.
· Depth: The depth of the bottom of the trench in relation to the ground level.
·Height: The height of the material between the bottom of the trench and the support point of the pipe.
Information: Relevant information on the characteristics of the edited pipes, including the length, initial elevation, final elevation ...
Checking this dialogue box will update the drawing of the pipes in accordance with the new characteristics inserted.
TcpMDT
