The ditch assigned does not exist
Cause: A ditch that has not been previously defined has been assigned.
Solution: Execute the Template Types > Definition of Ditches command and define the appropriate ditch.
Station does not exist on the vertical alignment
Cause: The station interval defined on the grade line is less than the one defined in the natural terrain.
Solution: Execute the Vertical Alignment > Define Vertical Alignment command or the Vertical Alignment > Edit Vertical Alignment commands and check the grade line.
Left/right-hand slope does not intersect terrain
Cause: One or several slopes have been assigned which do not cut the terrain. The problem may lie in the fact that the natural terrain is narrower that the cross-section template defined.
Solution: Obtain the cross-sections again with a left/right-hand width greater than before or modify the slopes’ gradient.
Terrain to the left/right shorter than platform
Cause: A platform has been assigned which is wider than the natural terrain in the segment.
Solution: Obtain the cross-sections again with a left/right-hand width greater than before.
Left/right-hand ditch assignment does not exist
Cause: No ditch assignment has been defined for the station specified.
Solution: Execute the command Templates > Assignment of templates to horizontal alignment and assign the appropriate ditch.
Roadbed assignment does not exist
Cause: No roadbed has been assigned for the station specified.
Solution: Execute the Templates > Assignment of Templates to Horizontal Alignment command and assign the appropriate roadbed.
The roadbed assigned does not exist
Cause: A roadbed that has not been previously defined has been assigned.
Solution: Execute the command Templates > Definition of Roadbeds and define the appropriate roadbed.
Median element assigned does not exist
Cause: A median element that has not been previously defined has been assigned.
Solution: Execute the Template Types > Definition of Elements command and define the appropriate median element.
Median element assigned does not exist
Cause: A median element that has not been previously defined has been assigned.
Solution: Execute the Template Types > Definition of Elements command and define the appropriate median element.
Insufficient median width
Cause: Either median width is incorrect or, on the contrary, the median element defined is too wide.
Solution: Check both the median’s definition in definition of platform as well as the definition of the median element assigned.
There is no correlation in code assignation
Cause: The platform’s vector codes may have possibly not been correctly assigned in the platform’s definition.
Solution: Check that the vector codes of the platforms assigned have been correctly assigned.
There is no information on the left/right-hand side profile
Cause: The cross-section has not been generated on one of the horizontal assignment’s sides.
Solution: Check that information does not really exist about the objects to be
cut in the side affected.
TcpMDT