When this command is executed, the following window is displayed where the characteristics of the sheets where the drawing will be inserted are set.
Formats: One can choose among the different predefined formats available. However, the dimensions of the sheet selected can subsequently be changed in the Width and Height fields.
Also, if we press the “...” button we access a screen used to personalize the different sheet formats.
Direction of the numbering: This is to indicate the direction in of the numbering of the sheets to insert. There are three possibilities given in the dialog box.
Layer: Layer in which the sheets are represented by default.
Text Height: This value refers to the height of the texts that will be labeled on each of the sheets.
Prefix: Each of the sheets will be identified with a prefix entered through this option and a sequential number from the first sheet inserted.
Once the dialog box has been validated, the program will request the lower left-hand point and the upper right-hand point to delimit the area where one wishes to insert the sheets.
Scale: Text insertion scale.
Window: In this section we indicate the initial and final coordinates between which the sheets will be. They can also be selected graphically by clicking on the button “Select <” or by introducing the coordinates manually in the corresponding boxes.
Once the coordinates are introduced the command displays an estimate of the number of sheets to be inserted, the number of Rows and number of Columns.
TcpMDT
